Description
NC008 |
 |
 |
 |
 |
 |
 |
 |
|---|---|---|---|---|---|---|---|
| NC008-02318 | 2 | 4 | 5/4″ (31.75mm) | 1.4~3.6 | 9 | DXV57 #14~#25 | 4000 |
| NC008-02381 | 2 | 4 | 3/2″ (38.1mm) | 1.4~3.6 | 9 | DXV57 #14~#25 | 4000 |
| NC008-0464-254 | 4 | 8 | 1/4-1-1/4″ (6.4-25.4-6.4mm) |
1.4~3.6 | 9 | DXV57 #14~#25 | 4000 |
| NC008-04254 | 4 | 8 | 1″ (25.4mm) | 1.4~3.6 | 9 | DXV57 #14~#25 | 4000 |
| NC008-0464-254/HPR | 4 | 8 | 1/4-1-1/4″ (6.4-25.4-6.4mm) |
1.4~3.6 | 9 | DXV57 #14~#25 | 4000 |
| NC008-0464-222/HPR | 4 | 8 | 1/4-7/8-1/4″ (6.4-22.2-6.4mm) |
1.4~3.6 | 9 | DXV57 #14~#25 | 4000 |
| NC008-06064 | 6 | 12 | 1/4″ (6.4mm) | 1.4~3.6 | 9 | DXV57 #14~#25 | 4000 |
Rear puller allows stable material feeding and well-balanced seam.
Needle feed and material feed can be adjusted synchronously.
Work on heavy material like Denim, up to 16 oz.
Designed for jeans waistband sewing, also can apply on jeans yoke seam, front, and elastic attaching.
Device
HPR/WAISTBAND ATTACHING DEVICE
For tape binding on waistband of workwears pants, jeans…etc.
Refer to below table to find optional binders for desirable seams.
Skip Stitch Device
Control freely to avoid stitches sewed on un-wanted working area.
| Finished Size | For Continuous Strips | For Arched Type | Side Feeding | Front Feeding |
|---|---|---|---|---|
| 1- 3/8″ (36mm) | B516P | B518P | B519P | B530R |
| 1- 1/2″ (38mm) | B516Q | B518Q | B519Q | B530S |
| 1- 5/8″ (42mm) | B516R | B518R | B519R | B530T |
| 1- 3/4″ (45mm) | B516S | B518S | B519S | B530U |
| Seam Type |  |
 |
 |
 |
